Amiga PSU Duo
New, advanced power supply unit PSU for dual setup of Commodore Amiga A500, A500+, A600, A1200, CD32 & A590.
Created by enthusiasts to offer 55W of total combined power and unique two output channels with additional 5VDC protection circuits and ripple & noise reduction. Precise output voltage control and load line calibration, common for both output channels. Light weight & small form factor. Variety of detachable in/out cables to match your on-desk configuration.
Important COVID-19 information: due to the COVID-19 outbreak, governments have implemented postal and courier services limitations across many countries worldwide. It's hard for our business but your health and service satisfaction is most important so we strongly advise to hold on with PSU purchases till the end of this worldwide crisis (or at least till full shipping services resuming in your country). It's not an isolated problem of Electroware company logistics but ALL the companies shipping goods worldwide are involved. You can still place the back order as we will process them all and prepare for immediate shipping as soon as the services would be fully resumed (notice it would take at least a month depending on destination). Some of services are still available (mainly express) so if you need to get your PSU really fast, try express shipping option. We will contact you then for possible options as we are tracking the services status changes all the time. Thank you for understanding and please be reasonable to protect your health. Your Commodore gear has withstand ~35 years and will surely wait a month longer ;)
Amiga PSU Duo - More power, more flexibility, more protection - because two Amigas are worth it.
This exceptional PSU has been made by enthusiasts, with enthusiasts and for enthusiasts :) Thanks to your continuous feedback, and tips from worldwide users of our successful basic Amiga PSU (which was copied and crippled by unfair competitors) model we've created the ultimate PSU solution for your Commodore Amiga gear.
55 Watts of combined power has been used to drive two parallel output channels, each one capable to power regular Amiga or CD32 / A590 devices. Boosted and accelerated Amiga configurations are welcomed as the 5VDC output has been equipped with potentiometer to adjust the main output in range of 5VDC-5.5VDC (measured unloaded). It's just to prevent voltage drop on the cables for heavy current loads. It's now possible to set the exact 5.0 VDC for your setup.
55W Watts has been wisely distributed and it's used for 5VDC rail mainly as 12VDC and -12VDC power consumption is rather marginal for Amiga system. 55W here is not equal to competitors offered 55W units, where most of total power is used for 12VDC rail (wasted). Amiga PSU Duo is simply a blend of reasonable price, features and size.
Please refer to Amiga Duo+ PSU for more advanced product (65W, two totally independent and adjustable output channels).
- Commodore Amiga A500 A500+ A600 A1200 compatible (rectangular 5-pin DIN plug) or CD32/A590 compatible (round 4-pin DIN plug)
- Stabilized, double protected +5VDC up to 8.0A rated output (total, 4A per channel max)
- Stabilized +12VDC up to 1.2A rated output (total, 0.6A per channel max)
- Stabilized -12VDC up to 0.15A rated output (total)
- Trim potentiometer for 5VDC fine adjustments (5-5.5V range) common for both outputs
- Double over current protection, individual for each of two outputs
- Main AC power On/Off switch
- Set of LED power good indicators (green 5VDC, yellow 12VDC, blue -12VDC)
- Eco friendly, green design: consumes ~20% less power compared to original PSU set
- Output cable length (1.5m) regular Amiga 500/600/1200 or CD32/A590 compatible.
- Detachable AC cable (allowing you to use your own desired cable length).
- Weight only 0.3 KG
- Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
If you need more than two output cables, they can be ordered separately. Contact us do discuss details.
Mind to select proper AC cable version (no cable by default to cut your costs):
- EU version: IEC C5 type 220-240 VAC (Europlug Type C) for all European countries except: UK, Ireland, Malta, Cyprus.
- US version: IEC C5 type 110-120 VAC (Type B) for USA, CAN, JPN, MEX and many others.
- UK version: IEC C5 type 220-240 VAC (Type G) for UK, Ireland, Malta, Cyprus, Malaysia and Singapore.
- AU version: IEC C5 type 220-240 VAC (Type I) for Australia, New Zealand, Fiji, Papua New Guinea and many Pacific Island countries.
- Risk of electrical shock and energy hazard. All failure should be examined by a qualified technician. Please do not open!
- Caution! Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids.
- Please do not install power supplies in places with high ambient temperature or close to the heat source.
- The maximum ambient temperature range allowed is 0C to 45C.
- Enclosed power supplier are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture.
- Output current and output wattage must not exceed the rated values on the specifications.
PSU designed exclusively for Commodore Amiga 500, Amiga 600, Amiga 1200, Amiga CD32 and A590 systems only - do not attempt connect to any other devices. This replacement PSU has been designed for Commodore Amiga vintage computer systems only and should be considered as an integral component of Commodore Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU.
Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Commodore Amiga system will work correctly (as it's ~30 years old).