Atari 520ST PSU - external power supply unit for Atari 520 ST & Atari 260 ST
search
  • Atari 520ST PSU - external power supply unit for Atari 520 ST & Atari 260 ST
  • Atari 520ST PSU - external power supply unit for Atari 520 ST & Atari 260 ST
  • Atari 520ST PSU - external power supply unit for Atari 520 ST & Atari 260 ST
  • Atari 520ST PSU - external power supply unit for Atari 520 ST & Atari 260 ST
  • Atari 520ST PSU - external power supply unit for Atari 520 ST & Atari 260 ST
  • Atari 520ST PSU - external power supply unit for Atari 520 ST & Atari 260 ST

ATARI 520ST EXTERNAL PSU

$50.56
Tax included We ship within 2-5 days. Delivery time depends on shipping carrier selected.

ATARI ST PSU for ATARI 520ST & 260ST computers

The Atari ST PSU is a 50W strong, modern replacement power supply unit for Atari 520ST and 260ST computer systems using external power supply. PSU provides stable filtered 5VDC up to 4.0A, 12VDC up to 2.0A and -12VDC up to 0.5A. All by industrial grade AC/DC power supply. Carefully trimmed to offer best performance. The best and most affordable basic Atari ST external PSU replacement on the market. Can be upgraded to adjustable version offering 5VDC voltage fine tuning to set exact 5VDC for your particular system. The one and only absolute industry standard using the Mean-Well's RPT-60B as a base component, followed by many copiers and clones you should beware!

Color: Black
AC cable (IEC C5): No, thanks
Protect & Adjust LED Module: No thanks
Quantity
In Stock

 

Atari ST PSU by Electroware: a fresh start for your Atari 520ST or 260ST computer system. Efficient and reliable, 55W strong medical grade PSU to power and preserve! New add-on Adjust & Protect module available to enable advanced features like voltage tuning and many more!

Stay original! Buy only the genuine Electroware's gear and beware the fancy overrated clones flooding eBay & WWW!

 

GET THE NEW PSU AS YOUR ATARI 520ST, 520ST+ OR 260ST (YES, IT EXISTS!) IS SURELY WORTH IT.

Atari 520ST PSU. Atari 260ST PSU. Atari ST PSU.

Atari ST 520 PSU by Electroware

The Atari 520ST (and 260ST) computers were originally equipped with external, big and heavy switching mode PSU. The original PSU was offering 5VDC@3A, 12VDC@0.03A & -12VDC@0.03A. All of these PSUs have same problem nowadays: all are nearly 40 years old and not longer reliable because of capacitors degradation. Old power supply, if still working, can ba a source of killing over voltage spikes that will burn your chips due to the electrolytic capacitors "dry outs" and component's ageing. It's happening especially if PSU is working overloaded.

If your PSU is gone, not longer working, or you are not sure about it's condition - it's time to get a solid, superior quality replacement. It's 50W (55W peak) of total combined output power: far more than two times stronger than original Atari 520ST (260ST) PSU and it's two times smaller in dimensions and weight (0.4KG) to save your desk's space.

I believe your Atari ST is using many enchantments nowadays as fans and users are creating wonderful hardware stuff like FDD emulators (using SD Card), HDD drives with CF card, video output enhancers, VGA/HDMI RasPi adapters, WiFi serial modems, memory upgrades, accelerators etc... all to enjoy.  But remember that all of these gadgets are stressing the PSU and original one become even more dangerous when working overloaded.

Please notice that most of cheap PSU replacements for Atari 520ST (260ST) computers are usually missing the -12VDC voltage (used for RS-232-C serial port operations) basing on the fact that most users is never using this port, so will never notice. Some of other popular replacements are stuffed with overrated gadgets but are missing the main On/Off switch - just to make te construction cheaper! Our philosophy is opposite: reliable PSU replacement needs to supply all three voltages (as per original specification) but offering more power on each line. The reliable, mechanical ON/OFF rocker switch is a must for computer health, overall safety and true energy saving when powered off (instead of pseudo stand-by modes).

Atari 520 ST PSU

Atari 520ST PSU original and new comparison.

UNIQUE FEATURES & QUALITY

 

THE ABSOLUTE BASICS OF MODERN ATARI 520ST (260ST) PSU

Standard Atari ST External PSU features:

  • ATARI 520ST, 520ST+, 260ST, 260ST+ compatible
  • Stabilized & filtered 5VDC up to 4A output (4.4A peak)  
  • Stabilized & filtered 12VDC up to 2A output (2.2A peak)
  • Stabilized & filtered -12VDC up to 0.5A output (0.55A peak) 
  • Active & passive over voltage protection for main +5VDC line
  • Over current protection for all output lines
  • Fully isolated & fused on AC side
  • Power On/Off switch
  • Long output cable (1.8m) with round DIN 7-pin female plug
  • Detachable input AC cable for all versions
  • Weight only 0.4 KG (2x less than original Atari ST PSU)
  • Runs COLD!
  • Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1

 

GO BEYOND THE BASIC: BUY THE ATARI 520ST PSU + EXTENSION MODULE

NEW Protection & Adjustment LED Module add-on to enable an advanced features:

  • Trimmer for 5VDC voltage fine tuning in range: 4.9-5.3V
  • Power good status LED (green)
  • Redundant, fast over voltage protection for 5VDC line
  • Voltage spikes suppression with ultra-fast TVS diode
  • Redundant, resettable over current protection for 5VDC line
  • Additional output ripple reduction by low-ESR capacitor filtering

 

LED protection module add-on board for Atari 520ST & Atari 260ST

LED protection module PCB board

 

UNIQUE FEATURES & QUALITY

 

Stay with the original Electroware products to gain top build quality, unique features unavailable with the clone products:

  • Reliable ON/OFF switch is a must for ATARI ST PSU
  • Detachable AC input cable (we deliver standard cable but you can use much longer cables if necessary).
  • Hi-quality round 7-pin female plug 100% ATARI 520ST/260ST compatible
  • 100% repairable, easy to disassemble by qualified technician, spare parts available.
  • All electric cables terminated with the industrial grade, detachable wire-to-board connectors. There's no amateur and dangerous direct AC and DC wire-to-board soldering!

Protection LED Module add-on advanced features:

  • Trimmer for 5VDC voltage fine tuning in range: 4.9-5.3V
  • Power good status LED (green)
  • Redundant, fast over voltage protection for 5VDC line
  • Voltage spikes suppression with ultra-fast TVS diode
  • Redundant, resettable over current protection for 5VDC line
  • Additional output ripple reduction by low-ESR capacitor filtering

Atari 520ST & 260ST PSU status LED indicator

Atari ST520 PSU power switch. Detachable AC input cable

 

TRUST & RESPONSIBILITY

Every single Electroware PSU unit is triple tested before dispatch. To assure flawless quality and long lasting performance we are testing with original Atari gear from our collection as well as by burn-in test with customized load simulating devices causing 150% overload (comparing to regular ATARI 520ST/260ST computer system).

Stay with the original Electroware products to gain top build quality, unique features unavailable with the clone products.

By purchasing this product you are supporting the retro computing community and contributing to our continuous developing process. Thank you!

 

Warning!

Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values.

This replacement Atari ST PSU has been designed for Atari 520ST and 260ST vintage computer systems only and should be considered as an component of Atari ST computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorized or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Atari ST PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Atari ST system will work correctly (it's ~40 years old).

 

Stay original! Buy only the genuine C64PSU.com gear and beware the fancy overrated clones flooding eBay & WWW!

Electroware

Specific References

EAN13
5906874492390
MPN
PSUAST_NC
New